
Flujo sin fisuras, energía sin límites
Flujo sin fisuras,
energía sin límites
2205 · 2507 · 2520
Tubo de acero especial, laminado según su especificación
- 6–630 mm
- Outside diameter
- 1–50 mm
- Wall thickness
- 20+
- Grades in production
- Annual sales (RMB)
- 2.000 millones
- Plant area (m²)
- 106,000
- Employees
- 400+
- Cold-rolling mills
- 34
Dónde va el tubo
Ocho sectores, una misma lógica de material: primero el entorno corrosivo y la temperatura, después el espesor.

Electric power
01Supercritical boilers, nuclear steam generators, solar thermal receivers and FGD scrubbers — the four places where the grade decision is made by temperature, not price.
Ver detalles
- Partes típicas
- Superheater / reheater, water wall, economiser, condenser U-tube, reactor internals, nuclear-grade instrument tube
- Grados habituales
- Super304H / HR3C · Inconel 690 · 317L · 2205 · Incoloy 800H

Natural gas & LNG
02LNG moves at −196 °C and town gas at 15 MPa; the same pipe family has to hold both, which is why impact testing at cryogenic temperature is written into the contract.
Ver detalles
- Partes típicas
- LNG transfer line, gathering line, town-gas main, indoor gas piping
- Grados habituales
- S31603 · 30408 · 316L · S32205 duplex

Oil refining
03High-temperature hydrogen service and sour crude are two different problems; the heat-affected zone of a weld often decides the tube's life before the base metal does.
Ver detalles
- Partes típicas
- Furnace tube, heat exchanger, hydrogenation air cooler, transfer line
- Grados habituales
- 321 · 347H · 316L · 2205 · 904L

Chemical & fine chemical
04Chlorides, acids and cyclic cleaning: the corrosion table narrows the choice to a handful of grades, and the cleaning regime usually narrows it further.
Ver detalles
- Partes típicas
- Reactor coil, heat exchanger, process piping, sampling line
- Grados habituales
- 304L · 316L · 904L · 2205 · 2507 · N06625

Desalination & water treatment
05Seawater at 70 °C is the classic duplex application; the membrane housing and the brine line are usually where 316L stops being enough.
Ver detalles
- Partes típicas
- Seawater intake, evaporator tube, brine line, membrane housing
- Grados habituales
- 2205 · 2507 · 316L · 904L

Marine engineering & shipbuilding
06Classification-society approvals decide whether the tube can be installed at all; the material decision comes after the paperwork decision.
Ver detalles
- Partes típicas
- Seawater piping, hydraulic line, deck service pipe, cargo piping
- Grados habituales
- 316L · 2205 · 2507 · 6Mo super-austenitic

Instrumentation
07Small OD, tight tolerance, clean bore: instrument tube is bought on concentricity and surface, not on tonnage.
Ver detalles
- Partes típicas
- Impulse line, sample probe, analyser tubing, 1/8"–1" OD
- Grados habituales
- 316L · 304L · precision tube

Heat exchangers
08U-bent, finned or straight: the tube-to-tubesheet joint is the failure point, and the tube's tolerance band is what makes that joint repeatable.
Ver detalles
- Partes típicas
- U-tube, finned tube, straight tube, condenser and cooler bundles
- Grados habituales
- 304/304L · 316L · 321 · 2205 · 2520
Gama de productos

Tubo sin costura de acero inoxidable 316L
TP316L / 022Cr17Ni12Mo2

Tubo soldado de acero inoxidable 304
TP304 / 06Cr19Ni10

Tubo soldado industrial de acero inoxidable
EFW / LSAW

Tubo para intercambiador de calor
A213 / A249

Tubo de precisión de acero inoxidable
A269 / A213

Tubo sanitario soldado de acero inoxidable
A270 / DIN 11850
Tres plantas, una cadena
Perforación en Fujian, laminado y acabado en Pingyang, ensayos en el laboratorio de nivel CNAS.

34cold-rolling mills · 60+ major machines
Pingyang HQ — rolling and finishing
Cold drawing, straightening and solution annealing run from one ERP+MES centre, with the 630 mill and solution-furnace waste-heat recovery.

100,000t of billet a year
Fujian Jinhong — piercing base
630, 150 and 50 piercing mills with full-process digital control.

CNASlaboratory
Testing centre — CNAS level
Universal testing machine, hydrostatic tester, ultrasonic and eddy-current detectors.
Live video audit
Book a 1-on-1 live HD video audit of the Pingyang production lines via Zoom, MS Teams or WhatsApp.
Manufacturing
Factory-direct production and testing
Piercing runs at the Jinhong base in Fujian; rolling and finishing in Pingyang, Wenzhou; testing in our own CNAS-level laboratory. Nothing is outsourced between billet and packed tube.
- 34 cold-rolling mills, 7 cold-drawing lines, 14 straightening lines under one ERP+MES centre
- Every lot sampled and released before packing, EN 10204 3.1 with each shipment
- Grades from 304 to 2507 and nickel alloys, OD 6–630 mm
- Video audit of the production line available on request

Pingyang headquarters plant, Wenzhou

Jinhong piercing base, Fujian

Tensile testing, in-house lab

Tube bundles before shipment
Certificaciones y cumplimiento
Cuatro certificados concentran el interés del comprador de exportación; el resto se detalla abajo.
Principales — lo primero que pide el comprador
Adicionales — sistemas y aprobaciones de producto
NCS Product Certification — Duplex Tube
GB/T 21833 duplex tube product certification
ISO 14001:2015 — Environmental Management
Environmental management
ISO 45001:2018 — Occupational Health & Safety
Occupational health and safety
ISO 50001:2018 — Energy Management
Energy management
Zhejiang Made Certification (ZJM)
Regional manufacturing standard
Drinking-Water Product Hygiene Licence
Potable water service
Marks on file

Credenciales corporativas: High-tech enterprise (Zhejiang) · Customs AEO advanced certified · Special equipment manufacturing licence (pressure piping) · Business licence · 24 intellectual property rights
Servicio y soporte
Una sola oficina para clientes de exportación: Shanghái gestiona la parte comercial; Pingyang se encarga de ingeniería, documentos de calidad y expedición.
- 24 h
- first reply, business days
- 72 h
- technical proposal
- 3
- working languages
- 100%
- lots with EN 10204 3.1 MTC
- 01
General enquiry
Acknowledged within one business day and routed to the responsible sales engineer.
- 02
Documents and standards
MTC, drawings or the governing standard shared within two business days.
- 03
Quality claim
Acknowledged within 24 hours; containment and a root-cause plan agreed with the customer's QA team.
- 04
Improvement suggestion
Reviewed by sales and QA together; the outcome is reported back within one week.
Pre-sales, in-sales and after-sales support is handled in English, Chinese and Spanish by the Shanghai international marketing centre, with the Pingyang technical and QA teams behind it.
Preguntas frecuentes
¿Cuál es el pedido mínimo de tubo sin soldadura?
El mínimo se fija por medida y grado para que la colada resulte rentable. Indíquenos la cantidad y la especificación objetivo y confirmamos el mínimo exacto para su medida en un día hábil. Los pedidos de prueba son negociables en la primera colaboración.
¿Suministran certificados de material EN 10204 3.1?
Sí. Cada lote se entrega con certificado de inspección EN 10204 3.1 con número de colada, grado, composición química, propiedades mecánicas y resultados de ensayo. Los certificados 3.2 con inspector externo se pueden solicitar.
¿Con qué normas pueden fabricar?
ASTM A312 / A213 / A269 / A270, GB/T 14976, GB/T 13296 y las tolerancias dimensionales de GB/T 17395-2024. Nuestros ingenieros participaron en la redacción de GB/T 17395-2024, por lo que también se pueden aplicar normas de cliente y planes de inspección acordados.
¿Cuál es el plazo de entrega del tubo 316L sin soldadura?
Las medidas estándar en stock salen en 3–7 días. La producción suele ser de 15–25 días tras el anticipo, según medida, grado y cantidad. El tubo soldado de gran diámetro y el tubo en U para intercambiadores requieren 25–35 días.
¿Pueden suministrar dúplex 2507 y tubo resistente al calor 2520?
Sí. El tubo superdúplex 2507 para líneas submarinas y el tubo 2520 resistente al calor o de aleación de níquel son dos de nuestras especialidades; también hay 2205 y 904L. Estos grados se fabrican por pedido y se cotizan según medida y cantidad.
¿Cómo se prueba el tubo antes del envío?
Prueba hidrostática, corrientes inducidas y ultrasonidos cuando se especifican, además de control dimensional, PMI, dureza y, según la norma, ensayo de aplastamiento o de corrosión intergranular. Los informes de ensayo viajan con la mercancía.












