DAKAI

Applications

Dónde va el tubo

Ocho sectores, una misma lógica de material: primero el entorno corrosivo y la temperatura, después el espesor.

  • Electric power

    01

    Supercritical boilers, nuclear steam generators, solar thermal receivers and FGD scrubbers — the four places where the grade decision is made by temperature, not price.

    Ver detalles
    Partes típicas
    Superheater / reheater, water wall, economiser, condenser U-tube, reactor internals, nuclear-grade instrument tube
    Grados habituales
    Super304H / HR3C · Inconel 690 · 317L · 2205 · Incoloy 800H
  • Natural gas & LNG

    02

    LNG moves at −196 °C and town gas at 15 MPa; the same pipe family has to hold both, which is why impact testing at cryogenic temperature is written into the contract.

    Ver detalles
    Partes típicas
    LNG transfer line, gathering line, town-gas main, indoor gas piping
    Grados habituales
    S31603 · 30408 · 316L · S32205 duplex
  • Oil refining

    03

    High-temperature hydrogen service and sour crude are two different problems; the heat-affected zone of a weld often decides the tube's life before the base metal does.

    Ver detalles
    Partes típicas
    Furnace tube, heat exchanger, hydrogenation air cooler, transfer line
    Grados habituales
    321 · 347H · 316L · 2205 · 904L
  • Chemical & fine chemical

    04

    Chlorides, acids and cyclic cleaning: the corrosion table narrows the choice to a handful of grades, and the cleaning regime usually narrows it further.

    Ver detalles
    Partes típicas
    Reactor coil, heat exchanger, process piping, sampling line
    Grados habituales
    304L · 316L · 904L · 2205 · 2507 · N06625
  • Desalination & water treatment

    05

    Seawater at 70 °C is the classic duplex application; the membrane housing and the brine line are usually where 316L stops being enough.

    Ver detalles
    Partes típicas
    Seawater intake, evaporator tube, brine line, membrane housing
    Grados habituales
    2205 · 2507 · 316L · 904L
  • Marine engineering & shipbuilding

    06

    Classification-society approvals decide whether the tube can be installed at all; the material decision comes after the paperwork decision.

    Ver detalles
    Partes típicas
    Seawater piping, hydraulic line, deck service pipe, cargo piping
    Grados habituales
    316L · 2205 · 2507 · 6Mo super-austenitic
  • Instrumentation

    07

    Small OD, tight tolerance, clean bore: instrument tube is bought on concentricity and surface, not on tonnage.

    Ver detalles
    Partes típicas
    Impulse line, sample probe, analyser tubing, 1/8"–1" OD
    Grados habituales
    316L · 304L · precision tube
  • Heat exchangers

    08

    U-bent, finned or straight: the tube-to-tubesheet joint is the failure point, and the tube's tolerance band is what makes that joint repeatable.

    Ver detalles
    Partes típicas
    U-tube, finned tube, straight tube, condenser and cooler bundles
    Grados habituales
    304/304L · 316L · 321 · 2205 · 2520

Envíe su lista de medidas o plano. Reciba una cotización en 24 horas.