Applications
Where the tube goes
Eight industries, one material logic: match the corrosion environment and the temperature, then set the wall thickness.

Electric power
01Supercritical boilers, nuclear steam generators, solar thermal receivers and FGD scrubbers — the four places where the grade decision is made by temperature, not price.
Details
- Typical parts
- Superheater / reheater, water wall, economiser, condenser U-tube, reactor internals, nuclear-grade instrument tube
- Common grades
- Super304H / HR3C · Inconel 690 · 317L · 2205 · Incoloy 800H

Natural gas & LNG
02LNG moves at −196 °C and town gas at 15 MPa; the same pipe family has to hold both, which is why impact testing at cryogenic temperature is written into the contract.
Details
- Typical parts
- LNG transfer line, gathering line, town-gas main, indoor gas piping
- Common grades
- S31603 · 30408 · 316L · S32205 duplex

Oil refining
03High-temperature hydrogen service and sour crude are two different problems; the heat-affected zone of a weld often decides the tube's life before the base metal does.
Details
- Typical parts
- Furnace tube, heat exchanger, hydrogenation air cooler, transfer line
- Common grades
- 321 · 347H · 316L · 2205 · 904L

Chemical & fine chemical
04Chlorides, acids and cyclic cleaning: the corrosion table narrows the choice to a handful of grades, and the cleaning regime usually narrows it further.
Details
- Typical parts
- Reactor coil, heat exchanger, process piping, sampling line
- Common grades
- 304L · 316L · 904L · 2205 · 2507 · N06625

Desalination & water treatment
05Seawater at 70 °C is the classic duplex application; the membrane housing and the brine line are usually where 316L stops being enough.
Details
- Typical parts
- Seawater intake, evaporator tube, brine line, membrane housing
- Common grades
- 2205 · 2507 · 316L · 904L

Marine engineering & shipbuilding
06Classification-society approvals decide whether the tube can be installed at all; the material decision comes after the paperwork decision.
Details
- Typical parts
- Seawater piping, hydraulic line, deck service pipe, cargo piping
- Common grades
- 316L · 2205 · 2507 · 6Mo super-austenitic

Instrumentation
07Small OD, tight tolerance, clean bore: instrument tube is bought on concentricity and surface, not on tonnage.
Details
- Typical parts
- Impulse line, sample probe, analyser tubing, 1/8"–1" OD
- Common grades
- 316L · 304L · precision tube

Heat exchangers
08U-bent, finned or straight: the tube-to-tubesheet joint is the failure point, and the tube's tolerance band is what makes that joint repeatable.
Details
- Typical parts
- U-tube, finned tube, straight tube, condenser and cooler bundles
- Common grades
- 304/304L · 316L · 321 · 2205 · 2520
