DAKAI

Capabilities

Manufacturing

Factory-direct production and testing

Piercing runs at the Jinhong base in Fujian; rolling and finishing in Pingyang, Wenzhou; testing in our own CNAS-level laboratory. Nothing is outsourced between billet and packed tube.

  • 34 cold-rolling mills, 7 cold-drawing lines, 14 straightening lines under one ERP+MES centre
  • Every lot sampled and released before packing, EN 10204 3.1 with each shipment
  • Grades from 304 to 2507 and nickel alloys, OD 6–630 mm
  • Video audit of the production line available on request
See the full capability →
  • Pingyang headquarters plant, Wenzhou

    Pingyang headquarters plant, Wenzhou

  • Jinhong piercing base, Fujian

    Jinhong piercing base, Fujian

  • Tensile testing, in-house lab

    Tensile testing, in-house lab

  • Tube bundles before shipment

    Tube bundles before shipment

Capacidades de fabricación y ensayo

Desde la carcasa perforada hasta el tubo embalado, con los datos de ensayo que lo demuestran.

  1. 01

    Piercing

    Billet is pierced into hollow shells on the 630, 150 and 50 mills, with full-process digital control; the 630 piercer handles the largest shells.

    Fujian Jinhong · 100,000 t of billet a year

  2. 02

    Rolling and cold drawing

    34 cold-rolling mills, 7 cold-drawing lines and 14 straightening lines, more than 60 major machines in total, run from one ERP+MES centre; waste-heat recovery from the solution furnace cuts energy per tonne by 18%.

    Pingyang · OD 6–630 mm, WT 1–50 mm

  3. 03

    Testing and dispatch

    Every lot is sampled, tested and documented before packing; certificates travel with the tube.

    CNAS-level laboratory · EN 10204 3.1 with every lot

Qué ensayamos y cómo

Más de veinte controles según métodos GB y ASTM; cada lote se muestrea y libera antes del embalaje.

Finished tube and non-destructive testing

EnsayoMétodo o equipoQué demuestra
PMIHandheld OES spectrometerChemical composition check
Eddy currentEddy current + ultrasonic combined unitFull-length surface and near-surface defects
UltrasonicCombined NDT unitInternal and longitudinal defects
RadiographyX-ray unitWeld and localised defects
HydrostaticHydrostatic test benchPressure tightness
PneumaticPneumatic test benchGas tightness
DimensionalGauges and in-line measurementOD, wall thickness, length, straightness
SurfaceVisual and borescopeSurface finish and cleanliness
PenetrantDye penetrantSurface-breaking defects

Mechanical and corrosion testing

EnsayoMétodo o equipoQué demuestra
MetallographyMetallurgical microscopeMicrostructure and phase balance
HardnessRockwell and Brinell testersHRB / HBW values
TensileHydraulic universal testing machineRp0.2, Rm and elongation at room and high temperature
Low-temperature impactImpact tester with cryogenic bathCharpy energy down to −196 °C
TechnologicalFlattening, flaring and bending rigsFormability of the tube body and weld
Intergranular corrosionIGC apparatusSensitisation resistance
Stress corrosionSCC rigChloride SCC resistance
Pitting and creviceImmersion test setupPitting and crevice resistance related to PREN

Live video audit

Book a 1-on-1 live HD video audit of the Pingyang production lines via Zoom, MS Teams or WhatsApp.

Reservar auditoría por video

Envíe su lista de medidas o plano. Reciba una cotización en 24 horas.