DAKAI

2026-05-21

Nuclear Seamless Pipe Localization: 42% Lower Cost, 70% Shorter Lead Time at Lianjiang

The Lianjiang nuclear project in Guangdong plans six CAP-series Generation III units totalling 8.62 GW. In March 2025 Dakai Special Steel partnered with Powerchina Nuclear Engineering to supply the core piping system.

Zero defects at high temperature and pressure

The pipe carries borated water and seawater at 300-330°C and 15.5 MPa. Specifications demand zero leakage, zero corrosion and zero defects, plus resistance to neutron irradiation, more than 2 million thermal cycles and a design life beyond 40 years.

Wall tolerance and a wide standards system

Wall thickness deviation must stay within ±5%, with tight control of inner-diameter roundness, straightness and surface roughness. Multi-batch, long-cycle production adds consistency requirements across mechanical, corrosion and dimensional properties.

Four steps: material, R&D, quality, delivery

Supply covers 316L/321/310S/2205/2507 duplex and nickel-alloy seamless pipe for the nuclear island, conventional island and auxiliary systems, meeting GB 13296, GB/T 14976 and ASTM standards.

Full-chain traceability from raw material to finished inspection, with advanced NDT, holds a 100% product pass rate. The team also provides standards interpretation, technical clarification and production scheduling.

42% lower cost, 70% shorter lead time

Domestic nuclear pipe is priced at RMB 60,000-90,000 per tonne. Purchased cost fell 42%, saving over RMB 10 million on the project. Lead time dropped from 6-12 months to 1.5-2.5 months; NDT pass rate reached ≥99.8% and localization rose from 35% to 92%.