DAKAI
Selection Guides1 min read

Why Stainless Steel Rusts: Chloride, Surface Contamination and Passive Film Failure

Stainless steel is not rust-proof: chloride pitting, carbon steel contamination and cold-work stress all break the passive film locally. Grade choice and passivation decide how long the pipe lasts.

By Dakai Steel Technical Team

Why Stainless Steel Rusts: Chloride, Surface Contamination and Passive Film Failure

Stainless steel does not mean rust-free. The metal resists corrosion through a very thin, dense chromium-rich oxide film, the passive layer, which keeps moisture, oxygen and corrosive media away from the surface. Light damage heals again when oxygen is present.

That film is not indestructible. Chloride ions are the most common killer: sea-breeze salt mist, bleach residue, some chemical media. Small and highly penetrating, they pierce weak points in the film and start pitting: a small brown speck on the surface, a deep pit underneath.

Surface contamination comes second. Carbon steel dust or iron filings picked up in processing and transport form galvanic cells with the stainless steel in humid air, so corrosion spreads outward from the contact point. Uncleaned coolant or splashed lime water breaks the film where it sits.

Cold rolling, cold drawing and straightening leave internal stress that can turn into a corrosion site. Solution treatment and annealing restore the structure and relieve that stress; acid pickling and passivation remove free iron, oxide scale and residues so the passive film rebuilds evenly.

Grade choice starts with chromium: at a sufficient level a stable passive film forms. Nickel improves structural stability, molybdenum raises pitting resistance. For coastal service, 316L or duplex costs far less up front than replacing a whole line within two years.

On welded pipe the heat-affected zone sensitises more, so specify 316L, extra-low carbon, to limit carbide precipitation. Clean off debris and marking paint before installation, and keep inspection reports and process records with the delivery for traceability.

Send your size list or drawing. Get a quotation within 24 hours.